Shop GRIPNMARK™

The Fastest Way to Mark It. Again and Again.

7x Faster Than Traditional Stencils

Stop wasting time taping, aligning, and repositioning flimsy stencil materials. GRIPNMARK™ Industrial Steel Stencils are designed for rapid repetitive marking, allowing operators to place, spray, lift, and move in seconds.

In our side-by-side test, a standard firewall marking took just 7 seconds using a GRIPNMARK™ stencil. The same marking using a traditional taped Mylar stencil required 49 seconds.

That's a savings of 42 seconds per marking.

Labor Savings Add Up Fast

  • 25 markings: Save over 17 minutes
  • 50 markings: Save over 35 minutes
  • 100 markings: Save over 1 hour 10 minutes
  • 250 markings: Save nearly 3 hours
  • 500 markings: Save nearly 6 hours
  • 1,000 markings: Save almost 12 hours

For contractors, facility maintenance teams, warehouse operators, and pressure washing companies, those labor savings can quickly exceed the cost of the stencil itself.
Hand holding GRIPNMARK steel stencil

Why GRIPNMARK™ Works

✔ One-handed operation

✔ No tape required

✔ Faster positioning and removal

✔ Reusable steel construction

✔ Thousands of marking cycles

✔ Built for walls, floors, crates, pallets, equipment, and industrial assets

The more markings you make, the more valuable a GRIPNMARK™ stencil becomes. Designed and manufactured by stencil specialists who produce over 10,000 custom stencils every year, GRIPNMARK™ is built specifically for repetitive industrial marking applications where speed matters.

GRIPNMARK™ Industrial Steel Stencils

The Fastest Way to Mark It. Again and Again.

GRIPNMARK™ Industrial Steel Stencils were developed for professionals who need to make hundreds—or even thousands—of markings without fighting traditional stencil designs.

Most stencils are simply flat sheets of material. They work, but they often require tape, magnets, two hands, or repeated bending and repositioning. GRIPNMARK™ changes that.

In our side-by-side testing, a standard firewall marking took just 7 seconds using a GRIPNMARK™ stencil. The same marking using a traditional taped Mylar stencil required 49 seconds.

That's a savings of 42 seconds per marking.

For contractors, warehouse operators, facility maintenance teams, manufacturers, and pressure washing companies, those labor savings can quickly add up to hours saved on a single project.

Every GRIPNMARK™ stencil is designed around an ergonomic handle system that allows rapid placement, spraying, removal, and repositioning. The result is faster marking, less operator fatigue, and increased productivity on every project.

Whether you're marking warehouse floors, firewalls, pallets, crates, equipment, shipping containers, walls, or construction materials, GRIPNMARK™ stencils are built to make repetitive marking easier.

Why GRIPNMARK™?

Faster Than Traditional Stencils

Designed specifically for repetitive marking applications where speed matters.

One-Handed Operation

The integrated handle allows operators to quickly place, spray, lift, and move without needing additional tools or accessories.

No Tape Required

Forget masking tape and temporary positioning methods. Simply position the stencil and spray.

Built for Repetitive Use

Unlike disposable cardboard or thin plastic stencils, GRIPNMARK™ steel stencils are designed for years of service and thousands of marking cycles.

Reduce Labor Costs

Faster positioning and faster marking means less labor spent on every stencil application. For businesses performing repetitive marking, those time savings can easily exceed the cost of the stencil itself.

Industrial Durability

Manufactured from steel rather than plastic or paper, GRIPNMARK™ stencils are designed to withstand demanding industrial environments.

Hand holding GRIPNMARK steel stencil

GRIPNMARK™ Mini

Our most compact and lightweight option.

  • Single handle design
  • Up to 1 line of custom text
  • Ideal for asset marking, equipment identification, inventory control, and small repetitive markings
  • Fast one-handed operation
Create Your Own GRIPNMARK™ Mini

GRIPNMARK™ Standard

The most versatile model in the lineup.

  • Single handle design
  • Up to 2 lines of custom text
  • Excellent for firewall markings, warehouse applications, pallet marking, and equipment labeling
  • Designed for rapid repetitive use
Design Your Own GRIPNMARK™ Standard
GRIPNMARK stencil that says ROCKY MOUNTIAN CONCRETE

GRIPNMARK™ Double

Built for larger markings and high-visibility applications.

  • Dual handle design
  • Larger marking area
  • Excellent for floor markings, ground markings, shipping crates, pallets, containers, and other flat surfaces
  • Can be quickly set down and sprayed for maximum speed and consistency
Design Your Own GRIPNMARK™ Double

Available Materials

18 Gauge Cold Rolled Steel

A durable and economical option for indoor environments and dry-use applications.

Best for:

  • Warehouses
  • Manufacturing facilities
  • Shipping departments
  • Indoor asset marking

20 Gauge Stainless Steel

Designed for outdoor and corrosive environments where maximum durability is required.

Best for:

  • Pressure washing companies
  • Construction sites
  • Marine environments
  • Outdoor storage yards
  • Utility and infrastructure projects

Common Applications

GRIPNMARK™ stencils are used throughout numerous industries for:

  • Firewall markings
  • Asset identification
  • Equipment numbering
  • Warehouse floor markings
  • Shipping crate markings
  • Pallet identification
  • Construction site labeling
  • Manufacturing operations
  • Utility infrastructure marking
  • Pressure washing services
  • Safety markings
  • Facility maintenance programs

Time Savings Add Up Fast

Based on our 7-second GRIPNMARK™ test versus a 49-second taped Mylar stencil:

  • 25 markings = Over 17 minutes saved
  • 50 markings = Over 35 minutes saved
  • 100 markings = Over 1 hour saved
  • 250 markings = Nearly 3 hours saved
  • 500 markings = Nearly 6 hours saved
  • 1,000 markings = Nearly 12 hours saved

The more markings you make, the more valuable GRIPNMARK™ becomes.

Custom Stencils Made Easy

Need more than simple text?

We can create fully customized GRIPNMARK™ stencils featuring:

  • Company logos
  • Directional arrows
  • Equipment identifiers
  • Safety symbols
  • Multi-line layouts
  • Custom sizes
  • Industry-specific designs

Contact us for a free design mock-up and quote.

Built by Stencil Specialists

Custom Cutouts manufactures over 10,000 custom stencils every year for customers across the United States. From simple text stencils to large industrial marking systems, stencil manufacturing is one of our core specialties.

The GRIPNMARK™ product line was developed from real-world customer feedback and years of stencil production experience. The result is a faster, more user-friendly stencil designed specifically for repetitive industrial marking applications.

Frequently Asked Questions

Why is GRIPNMARK™ faster than traditional stencils?

Traditional stencils often require tape, magnets, alignment, and repositioning. GRIPNMARK™ stencils feature integrated handles that allow operators to quickly place, spray, lift, and move to the next marking location.

Do I need tape or magnets?

In most applications, no. GRIPNMARK™ stencils are designed to be held and positioned directly by the operator.

What material should I choose?

Cold rolled steel is an economical option for indoor use. Stainless steel is recommended for outdoor environments, pressure washing applications, humid conditions, and long-term corrosion resistance.

Can I add my company logo?

Yes. We can incorporate logos, arrows, symbols, custom layouts, and additional text into fully customized GRIPNMARK™ designs.

How long will a steel stencil last?

With proper care, a steel stencil can withstand thousands of marking cycles and provide years of service.

Are GRIPNMARK™ stencils made in the USA?

Yes. Every GRIPNMARK™ stencil is designed, cut, and manufactured in the USA by Custom Cutouts.

Which GRIPNMARK™ model should I choose?

Choose the Mini for single-line asset marking, the Standard for most industrial marking applications, and the Double for larger floor, ground, pallet, and crate markings where a larger stencil area is beneficial.